ALL YOU NEED TO KNOW
This system uses its own framework which is attached to the shell scheme using simple brackets (provided). Your graphics, which are printed on fabric panels, are then “stretched” into the frame creating a perfect finish. This system could be used by clients also wanting to display their graphics outside of a shell scheme, ie in a free standing format. StandBuilder is a modular system, so it can grow with your exhibition and display requirements.
HIRE IT! This system is also available to hire, as in hire the frames and buy the graphics. For a one-off show this is your most cost-effective option, as long as you are happy to assemble the frames (approx 30 mins per frame).
01. Assemble your frame. Tools and instructions supplied. Typically allow 30 minutes for a 3m frame.
02. Hang your frame on the shell scheme using the brackets supplied. Allow five minutes for this.. 03. Apply your printed fabric panels to the frame following the guide supplied. Allow ten minutes for this. 04. If you are using StandBuilder as a free standing display, simply add your stabilizers to the frame at stage 02. Allow five minutes extra for this.
"StandBuilder System"
DOWNLOAD OUR PRODUCT SHEET
ONLY IF YOU WANT TO KNOW MORE!
StandBuilder is a frame based system that can be used to dress a shell scheme or free stand wherever you want it (exhibition, reception, boardroom, roadshow, showroom etc). In our publicity we describe the system as ideal for the "ambitious exhibitor” as you can start with one single wall and develop the system over time into a sophisticated free standing display unit. Replacement graphics are inexpensive so, if you attend numerous shows promoting different products, StandBuilder becomes a very attractive proposition. Graphics are dye-sublimation printed on fabric and slot into the frame under tension, giving you a perfect finish with invisible edges. In terms of portable graphic displays, this is as good as it gets.
• Unlike our Magiclad and Fabriclad systems (which use the shell scheme as its framework), the StandBuilder System (SBS) has its own framework
• SBS can be hung on a shell scheme wall to create a seamless fully-clad stand
• SBS can be used as a free standing displays system in a number of formats including straight _____ or L shaped, or U shaped or even Y shaped
• The addition of three horizontal bars converts a 3m stand to a 4m stand, so you do NOT have to buy a new frame if you want a bigger (or smaller) frame
• The addition of three vertical bars converts a 3m stand to a 4m stand, you do not have to buy a new frame if you want a taller (or shorter) frame (4m maximum)
• SBS can be accessorised with flat screens, spotlights, iPad holders, shelving, literature racks, goodie bag holders and much more
• Just at home in the office as on an exhibition stand - ie hang your superbly striking exhibition graphics in your boardroom, showroom or reception
StandBuilder can be accessorised (at the time of purchase or retrospectively) with a flat screen, LED spotlights, secure iPad holders, shelving, goodie bag holders, reception desks etc.
We call it StandBuilder (stand builder) as it grows with your requirements and you never have to throw anything away. What often starts as a simple display wall, can evolve into something very special.